PowerKure is a custom engineered solution designed to minimize and / or eliminate all the unique power quality problems at a facility. Our approach to power quality is based on the following activities: Audit: During the electrical systems audit, we collect electrical power quality information from the customer's facility. We will gather the following information: voltage, current, power factor, harmonics, most recent 12 months of utility bills, transformer nameplate data, etc. Proposal: The initial electrical survey will provide us with enough information to determine an approximated system size, the equipment cost with an estimated installation cost. The proposal will also include our guaranteed electrical savings once the equipment is installed. Design Analysis: This survey is a more detailed version of the original survey. At this stage we will check the original measurements and any possible variations thereof; identify a more economical or effective method to address the problem(s) and savings; determine the location at the site where the PowerKure system will be connected and determine breakers/disconnects, cables, and conduit sizes required for installation. System Design: The actual design of the PowerKure system can only begin after a design analysis has been performed. Since measurements are taken on the secondary load side of the main transformer on the common buss as well as each subsequent feeder downstream of the main distribution, this will allow us to design the optimal placement of the required components, placing some components closer to the individual problem load(s). Installation: PowerKure's authorized licensed electrician, or the customer's electrician, will install the required switchgear, breakers, disconnects, cables, etc. PowerKure will then assist the electrician with the placement of the actual PowerKure unit. Once installed, PowerKure will then measure the load and tune the PowerKure system for optimal performance.